Skip to content
Erum að vinna að flutningum yfir í Skútuvog 6, opnum formlega í lok nóvember! Hægt að sækja pantanir þar milli 11-14
Hægt að sækja pantanir í Skútuvog 6 milli 11-14 virka daga

Bondtech LGX® Lite Arrow for Creality CR-6 og CR-10 Smart

Original price 24.900 kr - Original price 24.900 kr
Original price
24.900 kr
24.900 kr - 24.900 kr
Current price 24.900 kr
Availability:
Low stock
SKU LGX_directdrive
Breyttu CR-6 SE, CR-6 SE MAX eða CR-10 Smart prentaranum þínum í beint drif (direct drive)

Bondtech er vandaður framleiðandi og fögnum við þessari fallegri lausn fyrir beint drif fyrir þessa prentara. Vinnur með upprunalegum beðmáls nemanum, (auto-bed level strain gauge)

Stilla þarf voltin á mótor (VREF), e-skrefin (esteps). Leiðbeiningar fyrir uppsetningu má finna hér.

Hægt að bæta við Mosquito heitum enda á þetta sett.

Settið frá inniheldur einnig mótor fyrir extruder, allt sem er í pakkanum:

1x LGX® Lite Large Gears eXtruder

1x LGX Lite extruder mounting set, sem inniheldur:

  • 1x PA12 extruder mount
  • 1x PA12 hotend mount
  • 4x M3x6 button head screw
  • 2x M3x10 button head screw
  • 2x M3x8 button head screw
  • 1x M3x30 screw
  • 1x M3 square nut
  • 1x Capricorn cutting fixture
  • 1x 70mm Capricorn tube

1x LGX Lite Arrow housing set sem inniheldur:

  • 1x PA12 front housing
  • 1x PA12 left wing
  • 1x PA12 right wing
  • 1x PA12 top lid
  • 1x PA12 fan shroud
  • 1x PA12 (breakout board/cables) cover
  • 2x M3x8 button head screw
  • 1x M3x16 screw
  • 2x M3x20 MC6S screw
  • 3x M3 square nut
  • 1x Powered by Bondtech sticker

 

 

Main Features

  • It converts the compatible printers from Bowden to direct extruder.
  • Extra load on strain gauge is limited to the LGX Lite itself.
  • Housing is light and insulated from the Extruder to allow for strain gauge levelling.
  • It is compatible with all stock hotends and cooling fans.
  • Housing is easy to remove for maintenance and service of the hotend and extruder.
  • Z-position of the fan shroud may be adjusted.

Additional Features

Weight: 65g.
E-steps : 562 @ 16 microsteps.
Klipper’s rotation_distance : 5.7.
Stepper motor current : 0.45 to 0.65A max.
Max operating temperature : 90°C.
It may be upgraded with Slice Engineering hotends:

  • Copperhead Screw Mount;
  • Mosquito;
  • Mosquito Magnum;
  • Mosquito Magnum + Air.