Diamant dichtol AM Spray
Alert me if this item is restocked.
We often restock popular items or they may be returned by the other customers. If you would like to be notified when this happens just enter your details below.
Diamant dichtol AM Spray
We respect your privacy and don't share your email with anybody.
Alert me if this item is restocked
We have cancelled your request.
Dichtol AM Spray is a ready-to-use product with a special polymer formulation that impregnates leaking components and seals small pores of 0 to 0.1 mm. It exhibits high pressure resistance and provides temporary protection from corrosion or during transport.
Suitable for:
- capillary-active deep impregnation of micropores, hairline cracks and porosities,
- targeted serial impregnation,
- single-point impregnation of large components,
Preparation and application:
Before application, the pores to be sealed must be thoroughly cleaned of dirt residues and other undesirable substances.
Apply the dichtol AM Spray four times at 1-minute intervals and keep moist for at least 5 minutes to allow the product to penetrate the pores deeply. Note that the temperature of the object to be impregnated should not exceed 40°C. The penetration of the polymer cannot be guaranteed at higher temperatures.
The impregnating product dries out completely after a short time.
Storage: Store the unopened bottle in a cool and dry place (+5°C to 30°C).
Signal word: Danger
Precautionary statements:
- P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P211 - Do not spray on an open flame or other ignition source.
- P233 - Keep container tightly closed.
- P251 - Do not pierce or burn, even after use.
- P261 - Avoid breathing dust/fume/gas/mist/vapours/spray.
- P264 - Wash hands thoroughly after handling.
- P271 - Use only outdoors or in a well-ventilated area.
- P280 - Wear protective gloves/protective clothing/eye protection/face protection.
- P312 - Call a POISON CENTRE/doctor if you feel unwell.
- P302+P352 - IF ON SKIN: Wash with plenty of water/soap
- P304+P340 - IF INHALED: Remove person to fresh air and keep comfortable for breathing.
- P301+P310 - If swallowed: Contact the nearest poison control centre or doctor immediately.
- P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P308+P313 - IF exposed or concerned: Get medical advice/ attention.
- P333+P313 - If skin irritation or rash occurs: Get medical advice/attention.
- P370+P378 - In case of fire: Use dry extinguishing power or sand to extinguish.
- P501 - Dispose of contents/container at an industrial incineration plant.
Hazard statements:
- H222 - Extremely flammable aerosol
- H229 - Pressurized container: may burst if heated
- H315 - Causes skin irritation
- H318 - Causes serious eye damage.
- H336 - May cause drowsiness or dizziness