Bambu Lab A1 stútar - ryðfrítt stál

Stútar úr ryðfríu stáli (stainless steel) frá Bambu Lab fyrir Bambu Lab A1 og A1 Mini prentara.

Stærðir í sem eru í boði af ryðfríu stáli:

• 0.2mm
• 0.4mm

Stútar út hertu stáli fyrir Bambu Lab A1 má finna hér

Highlights of Various Nozzle Diameters

0.2mm Nozzle
Optimal Print Fineness

Extremely small layer gaps
More detailed on the vertical print surface

0.2mm Nozzle
Optimal Print Fineness

Smaller diameter extrudes thin filaments
High resolution on the horizontal print surface

0.6mm and 0.8mm Nozzle
Faster Print Speed

Larger diameter extrudes more filaments per second, resulting in faster print speed

The 0.4mm nozzle is widely recognized as the standard nozzle diameter for modern 3D printers due to its optimal balance between print quality and print speed. This nozzle size is utilized in Bambu Lab A1 Series 3D printer.

Filament Compatibility

Material	0.2 mm Nozzle	0.4 mm Nozzle	0.6 mm Nozzle	0.8 mm Nozzle	Hardened Steel Required?
General PLA	YES	YES	YES	YES	Optional
PLA Sparkle	*①NO	YES	YES	YES	Optional
PLA Marble	*①NO	YES	YES	YES	Optional
Wood/Rock/Metal-filled PLA	*①NO	YES	YES	YES	Optional
PETG	YES	YES	YES	YES	Optional
PVA	YES	YES	YES	YES	Optional
ABS	YES	YES	YES	YES	Optional
ASA	YES	YES	YES	YES	Optional
PC	YES	YES	YES	YES	Optional
PA	*①NO	YES	YES	YES	Optional
TPU	*①NO	YES	YES	YES	Optional
Bambu PLA-CF	*①NO	*②Recommended	YES	YES	Required
Bambu PETG-CF	*①NO	*②Recommended	YES	YES	Required
Bambu PAHT-CF	*①NO	YES	*③Recommended	YES	Required
Bambu PET-CF	*①NO	YES	*③Recommended	YES	Required
CF/GF Filaments from other brands	*①NO	Not Recommended	YES	YES	Required

[*Note]

*① Filaments with carbon fiber, glass fiber, metal, or other inorganic particles are prone to clog a 0.2 mmnozzle.

*② Bambu PLA-CF and Bambu PETG-CF have been extensively tested and proven to have a low risk of clogging when printed with a hardened steel 0.4 mmnozzle, while also achieving higher print quality.

*③ For general carbon fiber or glass fiber filaments such as Bambu PAHT-CF and PET-CF, it is recommended to use a hardened steel 0.6 mm nozzle to minimize the risk of clogging and abrasion.

Learn more about filament compatibility on Bambu Lab Wiki.

Learn more about replacing the hotend with nozzle on Bambu Lab Wiki.