Skip to content
Erum að vinna að flutningum yfir í Skútuvog 6, opnum formlega í lok nóvember! Hægt að sækja pantanir þar milli 11-14
Hægt að sækja pantanir í Skútuvog 6 milli 11-14 virka daga

Bambu Lab A1 stútar - hert stál

Original price 3.190 kr - Original price 3.190 kr
Original price
3.190 kr
3.190 kr - 3.190 kr
Current price 3.190 kr
Availability:
Out of stock
Availability:
in stock, ready to be shipped
Availability:
in stock, ready to be shipped
SKU FAH020
Stærð: 0.6mm hert stál

Stútar úr hertu stáli frá Bambu Lab fyrir Bambu Lab A1 og A1 Mini prentara. Slitsterkir og henta fyrir Carbon Fiber og sjálflýsandi (glow in the dark) efni.

Stærðir í hertu stáli sem eru í boði:

  • 0.4mm
  • 0.6mm
  • 0.8mm

Stútar úr ryðfríu stáli fyrir Bambu Lab A1 má finna hér

Highlights of Various Nozzle Diameters

0.2mm Nozzle
Optimal Print Fineness

Extremely small layer gaps
More detailed on the vertical print surface

图片加载失败文案

0.2mm Nozzle
Optimal Print Fineness

Smaller diameter extrudes thin filaments
High resolution on the horizontal print surface

图片加载失败文案

0.6mm and 0.8mm Nozzle
Faster Print Speed

Larger diameter extrudes more filaments per second, resulting in faster print speed

图片加载失败文案

The 0.4mm nozzle is widely recognized as the standard nozzle diameter for modern 3D printers due to its optimal balance between print quality and print speed. This nozzle size is utilized in Bambu Lab A1 Series 3D printer.

Filament Compatibility

Material 0.2 mm Nozzle 0.4 mm Nozzle 0.6 mm Nozzle 0.8 mm Nozzle Hardened Steel Required?
General PLA YES YES YES YES Optional
PLA Sparkle *①NO YES YES YES Optional
PLA Marble *①NO YES YES YES Optional
Wood/Rock/Metal-filled PLA *①NO YES YES YES Optional
PETG YES YES YES YES Optional
PVA YES YES YES YES Optional
ABS YES YES YES YES Optional
ASA YES YES YES YES Optional
PC YES YES YES YES Optional
PA *①NO YES YES YES Optional
TPU *①NO YES YES YES Optional
Bambu PLA-CF *①NO *②Recommended YES YES Required
Bambu PETG-CF *①NO *②Recommended YES YES Required
Bambu PAHT-CF *①NO YES *③Recommended YES Required
Bambu PET-CF *①NO YES *③Recommended YES Required
CF/GF Filaments from other brands *①NO Not Recommended YES YES Required

[*Note]
*① Filaments with carbon fiber, glass fiber, metal, or other inorganic particles are prone to clog a 0.2 mmnozzle.
*② Bambu PLA-CF and Bambu PETG-CF have been extensively tested and proven to have a low risk of clogging when printed with a hardened steel 0.4 mmnozzle, while also achieving higher print quality.
*③ For general carbon fiber or glass fiber filaments such as Bambu PAHT-CF and PET-CF, it is recommended to use a hardened steel 0.6 mm nozzle to minimize the risk of clogging and abrasion.
Learn more about filament compatibility on Bambu Lab Wiki.

Learn more about replacing the hotend with nozzle on Bambu Lab Wiki.

In the Box

- Hotend with Nozzle

Compatibility

A1 Series