PrimaCreator CMYK Litasett til blöndunar

Create your own color!

PrimaCreator CMYK Pigment set is intended for use with any brand of clear or white resin, but for best effect we recommend the one from PrimaCreator or CopyMaster3D. It is used so custom colors can be created to suit individual needs. These pigment dispersions are designed to work with 3D printing applications where UV light is used to cure resin layer by layer.

Highlights

• Let your creativity flow and create your own colors.
• Perfect for mixing with clear or white resin.
• Any color combination possible
  

PrimaCreator CMYK Pigment set is intended for use with any brand of clear or white resin, but for best effect we recommend the one from PrimaCreator or CopyMaster3D. It is used so custom colors can be created to suit individual needs. These pigment dispersions are designed to work with 3D printing applications where UV light is used to cure resin layer by layer.

Shake well before each use. Slowly drip the pigment solution into your resin of choice and mix well until desired color is reached. To obtain the same color density of our pigmented regular resin, you will need to add approximately 4ml of the pigment dispersion. Makes sure not to add to much, adding too much pigment can result in slower curing times and potentially inhibit the cure completely.

The pigment solution can be added to our white resin or clear depending on the finish you are after. When adding to the white base resin an opaque finish will result. If you add to the clear resin a transparent look will result. The more pigment you add, the more solid the color will become.

Please be extremely cautious when handling the pigments as they will stain very easily, use gloves to avoid staining your skin.

Pigment dispersions are safe to use, but it is always recommended to read and understand the safety and technical information before use.