eSun ePC - 500gr.
by eSun
Original price
5.990 kr
-
Original price
5.990 kr
Original price
5.990 kr
5.990 kr
-
5.990 kr
Current price
5.990 kr
Availability:
in stock, ready to be shipped
SKU ePC175B05
PC efni frá eSun 500gr. á spólunni. Öflugt efni sem þarfnast þess að prentað er í lokuðum prentara.
eSUN ePC (polycarbonate) is a durable 3D printing filament with excellent mechanical properties and high impact resistance and toughness. It is also temperature resistant with a heat resistance of up to 80 °C.
Highlights
- High toughness
- High impact resistance
- Heat resistance
Note:
- It's better to dry the ePC filament before printing(70℃/>6H).the eBOX is suggested to use when printing the ePC filament.
- The shingkage of ePC material is high. Need to be used with printer which has chamber to print the ePC filament.
| Filament Properties Table | |
|---|---|
| 3D PRINTING FILAMENT | ePC |
| Density(g/cm3) | 1.12 |
| Heat Distortion Temp(℃,0.45MPa) | 80 |
| Melt Flow Index(g/10min) | 19.5(300℃/1.2kg) |
| Tensile Strength(MPa) | 54.88 |
| Elongation at Break(%) | 150.24 |
| Flexural Strength(MPa) | 63.41 |
| Flexural Modulus(MPa) | 1073 |
| IZOD Impact Strength(kJ/㎡) | 13.2 |
| Durability | 10/10 |
| Printability | 6/10 |
| Recommended printing parameters | |
| Extruder Temperature(℃) | 240 – 270℃ Recommended temperature：260℃ |
| Bed temperature(℃) | 80 – 120°C |
| Fan Speed | 0% |
| Printing Speed | 20 – 50mm/s |
| Heated Bed | Required |
| Recommended Build Surfaces | PVP solid glue, PEI |