PrimaCreator Volcano Compatible Hardend Steel Nozzle - 1stk.

Hert stál stútar sem passa á Anycubic Vyper, Kobra Max og aðra Volcano heita enda eins og Flsun V400. Veldu mismunandi stærðir. 

Hert stál hentar vel til að prenta efni sem krefjast frekari hörku í stútunum. T.d. Carbon fiber sem er með koltrefja ögnum sem er þekkt fyrir að slíta eir (brass) stútum hratt.

0.6mm er mjög skemmtileg blanda af gæðum og hraðari prent tíma. Sérstaklega þegar notast er við "fully dynamic variable line width" í Cura 5.0 og nýrri
Smelltu hér fyrir nánari umfjöllun

The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print.

Premium nozzles

The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print.

High quality

All nozzles from PrimaCreator are made from the best high-quality brass or steel (depending on type) and are completed in a state of the art factory. All nozzles are manufactured with a tolerance of less than ± 0.01 mm. This means that your filament will have a very smooth and clear surface while extruding which, of course, results in better prints.

The process

• The process of making a PrimaCreator nozzle begins with a selected high-quality material. When the material reaches the factory, there is first an optical inspection made of the material that are going to be used for each batch of nozzles. Then it´s time to clamp the material, in other words, make it into a long rod. In our process this only is done once, in many other (cheaper) cases, this process must be repeated several times, often as many as 3-4 times and yet you don´t get the same results.
• After this process, the material goes through an ultrasonic cleaning bath and after that it is cleaned again and protected against surface oxidation.
• The nozzle will now take shape with millimeter precision, the tolerance is less than ± 0.01 mm.
• The process of removing sharp edges from the nozzles is a very important step as this makes up a big part of the result. If there is to much sharp edges left on the nozzle it will make the nozzle more prone to clog. So it´s essential that the nozzle is very smooth and clean before it is used. In every batch a few nozzles are selected and cut in half to make sure that every specification is met, and that the surface is in perfect condition.
• The nozzles are then checked for one last time and packed individually in a protective box – ready to be shipped to you.

Recommendations

For best results and optimal print quality, we highly recommend that you re-level your build plate after changing to a new nozzle. Note that a PrimaCreator nozzle might be compatible with your printer, but the distance between nozzle and build plate must be adjusted.

Marks/dots on Nozzle = Size

• 0 = 0.20mm
• 3 = 0.40mm
• 4 = 0.60mm
• 5 = 0.80mm

Passar í eftirfarandi prentara

Artillery® Sidewinder X1 SW-X1 3D Printer 300x300x400mm
Omni3D Factory 2.0 Industrial 3D-Printer
Omni3D Omni 500 LITE Industrial 3D-Printer
Omni3D Factory 2.0 NET Industrial 3D-Printer
Anycubic Vyper
Artillery® Sidewinder X2 SW-X2 - 3D Printer 300*300*400mm
Artillery® Sidewinder X2 SW-X2 - 3D Printer 300*300*400mm
Artillery® Genius-Pro - 3D Printer 220*220*250mm
Creality K8
Anycubic Kobra Max
Anycubic Kobra
E3D Volcano blocks
Other Volcano type blocks
FLSUN Super Racer
Lulzbot TAZ MOARstruder