Hoppa í meiginmál
Pantaðu fyrir 12:00 á virkum dögum þá afgreiðum við samdægurs
Afgreiðum samdægurs ef pantað er fyrir 12:00 virka daga

Taulman 910 Alloy Svart 450gr. 1.75mm

frá Taulman
Verð 7.688 kr - Verð 7.688 kr
Verð
7.688 kr
7.688 kr - 7.688 kr
Verð nú 7.688 kr
með VSK
Staða:
Uppselt tímabundið
Staða:
Lág birgðarstaða
SKU
Litur: Glær

910 is the first 3D Printable High Impact, High Durability co-polymer Alloy with a tensile strength of 8,100PSI, thus matching 10-15%% glass filled materials! Alloy 910 is meant for high temperature, high strength and high durability uses. Alloy 910 is an excellent material for molding , Robotics, Machining or any need that requires a High Tensile feature along with high durability. Due to Alloy 910's chemical composition, it has the least water absorption of all similar materials containing a Nylon component.

Features

  • High Impact, High Durability co-polymer Alloy with a tensile strength of 8,100PSI
  • Is meant for high temperature, high strength and high durability uses
  • Excellent material for Molding, Robotics and Machining

  • Raise3D hafa samþykkt Nylon 910 það til notkunar í þeirra prenturum, sjá Open Filament Program Certified Filament List

    Alloy 910 is a significant development by taulman3D and both our chemical house and post processing company.  The goal was to provide a super material with very high tensile, yet sufficient elongation to maintain a high degree of durability.  Alloy 910, when 3D Printed comes in at 8,100 PSI Tensile and close to 12,000PSI when injection molded.

    Potential uses:
  • Any industrial parts that are currently being made of other high tensile polymers.
  • Large motor mounting
  • Industrial vibration isolators and damping parts
  • High Pressure Sand Blasting resistant
  • Sand Blast Masking
  • Electroplating supports and hangers
  • Chemical dip and tank supports.
  • High end gears and cams
  • Chemical resistant equipment covers.

    Basic Data
    Filament Typ PA
    Diameter 1,75 mm
    Tolerance 0,05 mm
    Weight 0,45 kg
    Lenght 148 m
     
    Printing Parameter
    Recomended Printing Temp Min 250 ºC
    Recomended Printing Temp Max 260 ºC
    Recomended Printbed Temperature Min 30 ºC
    Recomended Printbed Temperature Max 65 ºC
    Recomended Printing Speed Max 40 mm/s
    Recomended Retraction Min 3 mm
    Recomended Retraction Max 4 mm
    General  
    Specific gravity 1,263
    Tensile  
    Tensile strength 55,8 MPa
    Elongation  
    Elongation at yield 32 %
    Flexural  
    Flexural Modulus 502