Hoppa í meiginmál
Sendum samdægurs alla virka daga þegar pantað er fyrir 13:00
Sendum samdægurs alla virka daga þegar pantað er fyrir 13:00

PrimaCreator Volcano Compatible Hardend Steel Nozzle - margar stærðir

Verð 2.790 kr - Verð 2.890 kr
Verð
2.790 kr
2.790 kr - 2.890 kr
Verð nú 2.790 kr
með VSK
Staða:
Lág birgðarstaða
Staða:
Lág birgðarstaða
Staða:
Uppselt tímabundið
Staða:
Lág birgðarstaða
SKU 24136
Stærð: 0.4mm

Hert stál stútar sem passa á Anycubic Vyper, Kobra Max,ö og aðra Volcano heita enda. Veldu mismunandi stærðir. 

Hert stál hentar vel til að prenta efni sem krefjast frekari hörku í stútunum. T.d. Carbon fiber sem er með koltrefja ögnum sem er þekkt fyrir að slíta eir (brass) stútum hratt.

0.6mm er mjög skemmtileg blanda af gæðum og hraðari prent tíma. Sérstaklega þegar notast er við "fully dynamic variable line width" í Cura 5.0 og nýrri
Smelltu hér fyrir nánari umfjöllun

The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print.

  • Features
  • high-quality nozzle
  • state of the art factory
  • tolerance is less than ± 0.01 mm


  • Premium nozzles

    The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print.

    High quality

    All nozzles from PrimaCreator are made from the best high-quality brass or steel (depending on type) and are completed in a state of the art factory. All nozzles are manufactured with a tolerance of less than ± 0.01 mm. This means that your filament will have a very smooth and clear surface while extruding which, of course, results in better prints.

    The process

    • The process of making a PrimaCreator nozzle begins with a selected high-quality material. When the material reaches the factory, there is first an optical inspection made of the material that are going to be used for each batch of nozzles. Then it´s time to clamp the material, in other words, make it into a long rod. In our process this only is done once, in many other (cheaper) cases, this process must be repeated several times, often as many as 3-4 times and yet you don´t get the same results.
    • After this process, the material goes through an ultrasonic cleaning bath and after that it is cleaned again and protected against surface oxidation.
    • The nozzle will now take shape with millimeter precision, the tolerance is less than ± 0.01 mm.
    • The process of removing sharp edges from the nozzles is a very important step as this makes up a big part of the result. If there is to much sharp edges left on the nozzle it will make the nozzle more prone to clog. So it´s essential that the nozzle is very smooth and clean before it is used. In every batch a few nozzles are selected and cut in half to make sure that every specification is met, and that the surface is in perfect condition.
    • The nozzles are then checked for one last time and packed individually in a protective box – ready to be shipped to you.

    Recommendations

    For best results and optimal print quality, we highly recommend that you re-level your build plate after changing to a new nozzle. Note that a PrimaCreator nozzle might be compatible with your printer, but the distance between nozzle and build plate must be adjusted.

    Marks/dots on Nozzle = Size

    • 0 = 0.20mm
    • 3 = 0.40mm
    • 4 = 0.60mm
    • 5 = 0.80mm

    Passar í eftirfarandi prentara

    Artillery® Sidewinder X1 SW-X1 3D Printer 300x300x400mm
    Omni3D Factory 2.0 Industrial 3D-Printer
    Omni3D Omni 500 LITE Industrial 3D-Printer
    Omni3D Factory 2.0 NET Industrial 3D-Printer
    Anycubic Vyper
    Artillery® Sidewinder X2 SW-X2 - 3D Printer 300*300*400mm
    Artillery® Sidewinder X2 SW-X2 - 3D Printer 300*300*400mm
    Artillery® Genius-Pro - 3D Printer 220*220*250mm
    Creality K8
    Anycubic Kobra Max
    Anycubic Kobra
    E3D Volcano blocks
    Other Volcano type blocks
    FLSUN Super Racer
    Lulzbot TAZ MOARstruder