Hoppa í meiginmál
Dagana 18.-22. nóv. er eingöngu hægt að fá pantanir sendar með Pakkaþjónustu Eimskips. Lokað er í Skútuvogi 6
18-22nóv. erum við eingöngu netverslun. Lokað Skútuvogi 6
PrimaCreator PLA - Carbon EasyPrint Carbon PLA Svart - 1 kg

EasyPrint Carbon PLA Svart - 1 kg

frá PrimaCreator
6.780 kr - 6.780 kr
6.780 kr
6.780 kr - 6.780 kr
6.780 kr
með VSK
Staða:
Lág birgðarstaða
SKU PC-ECPLA-175-1000-BK

EasyPrint Carbon is a new type of high-performance filament for your 3D-printer. The natural PLA is reinforced with carbon-fiber. This results in a filament that is very rigid and has a high impact strength. EasyPrint Carbon has many applications, such as drone and RC parts, automotive parts and every application where a stiff and rigid filament is needed. Due to the abrasive nature of this filament, we highly recommend a 0,6 mm nozzle in hardened steel or similar.

EasyPrint Carbon is a new type of high-performance filament for your 3D-printer. The natural PLA is reinforced with carbon-fiber. This results in a filament that is very rigid and has a high impact strength. EasyPrint Carbon has many applications, such as drone and RC parts, automotive parts and every application where a stiff and rigid filament is needed. Due to the abrasive nature of this filament, we highly recommend a 0,6 mm nozzle in hardened steel or similar.

Unique properties

EasyPrint CARBON is a very useful material that has very unique material properties. Mixed with small, chopped strands of carbon fibre, EasyPrint CARBON filament offers incredible stiffness, structure and great interlayer adhesion. Due to the fact that the risk of warping is very low, EasyPrint Carbon is very easy to 3D print and has a matte finish after 3D printing. The finished 3D prints are very stiff and useful if you need objects with a good stiffness-to-weight ratio.

Easy to use

EasyPrint Carbon does not require a heated print bed for processing. If your 3D printer has one, set it to 35-60˚C to get really good adhesion of the first layer to the print bed surface. Due to the abrasive nature of EasyPrint Carbon, we recommend that you use a hardened steel nozzle or similar for this filament. Using a normal brass nozzle is not a problem, but it will wear out the nozzle in a short time.

Optimal adhesion to build platform

EasyPrint Carbon sticks to BuildTak or even better, PEI sheet. For best result, coat your build plate with Magigoo.

Highlights

  • Carbon reinforced PLA with very good layer adhesion
  • Easy processing, no warping
  • High impact strength
  • No hazardous fumes
  • Natural matt look