Bambu Lab High Flow stútur með tungsten carbide
Alert me if this item is restocked.
We often restock popular items or they may be returned by the other customers. If you would like to be notified when this happens just enter your details below.
Bambu Lab High Flow stútur með tungsten carbide
Við virðum persónuvernd þína og deilum ekki netfanginu þínu með neinum.
Alert me if this item is restocked
Háhraða stútur með tungsten
- Perfect for Abrasive Filament
- HRA 90 Tougher nozzle, lower maintenance
Important Notice
2. Compatible with both left and right hotends on H2D.
3. On H2C, this hotend is supported only on the Left (Lifting) Hotend.
HRA 90 Tougher nozzle, lower maintenance
With HRA 90 compared to hardened steel's 74, the Tungsten Carbide nozzle provides exceptional wear resistance.This results in a 50% increase in lifespan when printing abrasive, high-performance fiber-reinforced filaments.
Quick Swap Nozzle Design
The special design of hotend heating assembly enables easy separation of the thermal and electronic components of the hotend. Simply unlock the latch for quick and easy hotend removal and installation.
*Please ensure that the hotend has cooled down before swapping, and avoid touching the heat block (lower section of the hotend) to prevent any risk of burns.
0.6mm and 0.8mm Nozzle - Faster Print Speed
Larger diameter extrudes more filaments per second, resulting in faster print speed
Comparison of Different Nozzle Sizes
| 0.4 mm Nozzle | 0.6 mm Nozzle | 0.8 mm Nozzle | |
| Usage scenario | Ideal for everyday use with the perfect balance of speed and quality |
Faster speeds and capable of printing high-performance filaments, with some decrease in resolution |
Faster speeds and capable of printing high-performance filaments, with some decrease in resolution |
| Commonly used for | Toys Mechanical parts Decorative objects |
Large structural parts Functional parts for household Industrial or engineering parts High-strength models |
Large structural parts Functional parts for household Industrial or engineering parts High-strength models |
Real High Flow: Save Up to 30% of Your Time
The Tungsten Carbide Super Durable Nozzle's optimized melt zone enables significantly increased volumetric speed, achieving up to 62.5%1 higher max volumetric speed and reducing print time by up to 30%2 with ease. The larger your model, the more time you save—especially for prints with extensive infills.
1. Tested with ABS, Ø240mm single-wall cylinder, 0.2mm layer height, 1.0mm outer wall, 280℃ nozzle temperature, spiral vase mode on.
2. Tested with PLA Basic, 15% infill, 300x300x300mm cube.
| PLA Basic | PLA Matte | PETG HF | |
| Tungsten Carbide Nozzle (0.4mm) | 24 mm³/s |
28 mm³/s
|
24 mm³/s
|
| High Flow Tungsten Carbide Nozzle Nozzle (0.4mm) | 40 mm³/s | 48 mm³/s | 32 mm³/s |
| High Flow Tungsten Carbide Nozzle Nozzle (0.6mm) | 40 mm³/s | 40 mm³/s | 40 mm³/s |
| High Flow Tungsten Carbide Nozzle Nozzle (0.8mm) | 40 mm³/s | 40 mm³/s | 40 mm³/s |
High-Speed Precision: Sharp Details Every Time
Say goodbye to under-extrusion, rough surfaces, and loss of detail. Unlike standard high-flow nozzles, Bambu's high yet consistent extrusion ensures crisp edges, flawless texturing, and ultra-smooth surfaces—every single time.
Upgrade now and print faster without compromise!
Filament Compatibility
| Filament | 0.4 mm Tungsten Carbide Nozzle |
0.6 mm Tungsten Carbide Nozzle |
0.8 mm Tungsten Carbide Nozzle |
| PLA Basic | √ | √ | √ |
| PLA Matte | √ | √ | √ |
| PLA Basic Gradient | √ | √ | √ |
| PLA Silk+ | √ | Not recommended | Not recommended |
| PLA Silk Dual Color | √ | Not recommended | Not recommended |
| PLA Silk | √ | Not recommended | Not recommended |
| PLA Metal | √ | √ | √ |
| PLA Marble | √ | √ | √ |
| PLA Sparkle | √ | √ | √ |
| PLA Wood | √ | √ | √ |
| PLA Galaxy | √ | √ | √ |
| PLA Glow | √ | √ | √ |
| PLA-CF | √ | √ | √ |
| PLA Aero | √ | Not recommended | Not recommended |
| PETG HF | √ | √ | √ |
| PETG Translucent | √ | √ | √ |
| PETG-CF | √ | √ | √ |
| ABS | √ | √ | √ |
| ABS-GF | √ | √ | √ |
| ASA | √ | √ | √ |
| ASA Aero | √ | Not recommended | Not recommended |
| ASA-CF | √ | √ | √ |
| PC | √ | √ | √ |
| PC FR | √ | √ | √ |
| TPU for AMS | √ | √ | √ |
| TPU 95A HF | √ | √ | √ |
| TPU 85A | X | Not recommended | Not recommended |
| TPU 90A | Not recommended | Not recommended | Not recommended |
| PAHT-CF | √ | √ | √ |
| PET-CF | √ | √ | √ |
| PA6-CF | √ | √ | √ |
| PPA-CF | √ | √ | √ |
| PPS-CF | √ | √ | √ |
| Support for ABS | √ | √ | √ |
| Support for PLA/PETG | √ | √ | √ |
| Support for PA/PET | √ | √ | √ |
| Support for PLA (New Version) | √ | √ | √ |
| PVA | √ | √ | √ |
| PA6-GF | √ | √ | √ |
Filament Compatibility
| Filament | 0.4 mm High Flow Tungsten Carbide Nozzle |
0.6 mm High Flow Tungsten Carbide Nozzle |
0.8 mm High Flow Tungsten Carbide Nozzle |
| PLA Basic | √ | √ | √ |
| PLA Matte | √ | √ | √ |
| PLA Basic Gradient | √ | √ | √ |
| PLA Silk+ | √ | √ | √ |
| PLA Silk Dual Color | √ | √ | √ |
| PLA Silk | √ | √ | √ |
| PLA Metal | √ | √ | √ |
| PLA Marble | √ | √ | √ |
| PLA Sparkle | √ | √ | √ |
| PLA Wood | √ | √ | √ |
| PLA Galaxy | √ | √ | √ |
| PLA Glow | √ | √ | √ |
| PLA-CF | Not recommended | √ | √ |
| PLA Aero | √ | √ | √ |
| PETG HF | √ | √ | √ |
| PETG Translucent | √ | √ | √ |
| PETG-CF | Not recommended | √ | √ |
| ABS | √ | √ | √ |
| ABS-GF | √ | √ | √ |
| ASA | √ | √ | √ |
| ASA Aero | √ | √ | √ |
| ASA-CF | Not recommended | √ | √ |
| PC | √ | √ | √ |
| PC FR | √ | √ | √ |
| TPU for AMS | √ | √ | √ |
| TPU 95A HF | √ | √ | √ |
| TPU 85A | X | X | X |
| TPU 90A | X | X | X |
| PAHT-CF | Not recommended | √ | √ |
| PET-CF | √(Only for Left Hotend) | √(Only for Left Hotend) | √(Only for Left Hotend) |
| PA6-CF | Not recommended | √ | √ |
| PPA-CF | √(Only for Left Hotend) | √(Only for Left Hotend) | √(Only for Left Hotend) |
| PPS-CF | √(Only for Left Hotend) | √(Only for Left Hotend) | √(Only for Left Hotend) |
| Support for ABS | √ | √ | √ |
| Support for PLA/PETG | √ | √ | √ |
| Support for PA/PET | √ | √ | √ |
| Support for PLA (New Version) | √ | √ | √ |
| PVA | √ | √ | √ |
| PA6-GF | Not recommended | √ | √ |
1. If you need multi-color printing with the AMS, connect the AMS to the right-side Fixed Hotend.
2. If you want to use the second hotend for support-material printing, we recommend using the Liftable Hotend.
3. TPU85A is only supported on the right-side Fixed Hotend. TPU95AHF/90A is expected to be supported on the left-side Liftable Hotend starting from firmware version U2.
4. PET-CF / PPA-CF / PPS-CF are supported only on the left-side Liftable Hotend.
In the Box
- Tungsten Carbide Nozzle *1
Compatibility
H2 Series/P2S/X2D