Bambu Lab X1 Hotend Assembly - Hert eða ryðfrítt stál
frá Bambu Lab
Verð
8.490 kr
-
Verð
8.490 kr
Verð
8.490 kr
8.490 kr
-
8.490 kr
Verð nú
8.490 kr
með VSK
Staða:
á lager, tilbúin til afhendingar
Staða:
Uppselt tímabundið
Staða:
Lág birgðarstaða
Staða:
Uppselt tímabundið
Staða:
Uppselt tímabundið
SKU FAH001
Heilt sett af heitumenda fyrir Bambu Lab X1, veldu um fjórar mismunandi stærðir af stút úr hertu stáli eða ryðfríu stáli
Hert stál: 0.4mm, 0.6mm eða 0.8mm
Ryðfrítt stál: 0.2mm eða 0.4mm
Settið inniheldur viftu, hitara og hitamæli, allt sem þú þarft til að skipta hratt og örugglega um stútinn.
Þetta sett gengur ekki fyrir P1P prentarann, smelltu hér fyrir stúta sem passa á P1P
Highlights of Various Nozzle Diameters
0.2mm Nozzle
Optimal Print Fineness
Extremely small layer gaps
More detailed on the vertical print surface
0.2mm Nozzle
Optimal Print Fineness
Smaller diameter extrudes thin filaments
High resolution on the horizontal print surface
0.6mm and 0.8mm Nozzle
Faster Print Speed
Larger diameter extrudes more filaments per second, resulting in faster print speed
The 0.4mm nozzle is widely recognized as the standard nozzle diameter for modern 3D printers due to its optimal balance between print quality and print speed. This nozzle size is utilized in both the Bambu Lab X1 Series and P1P 3D printers.
Filament Compatibility
| Material | 0.2 mm Nozzle | 0.4 mm Nozzle | 0.6 mm Nozzle | 0.8 mm Nozzle | Hardened Steel Required? |
| General PLA | YES | YES | YES | YES | Optional |
| Wood/Rock/Metal-filled PLA | *NO | YES | YES | YES | Optional |
| PETG | YES | YES | YES | YES | Optional |
| PVA | YES | YES | YES | YES | Optional |
| ABS | YES | YES | YES | YES | Optional |
| ASA | YES | YES | YES | YES | Optional |
| ASA | YES | YES | YES | YES | Optional |
| PC | YES | YES | YES | YES | Optional |
| PA | *NO | YES | YES | YES | Optional |
| TPU | *NO | YES | YES | YES | Optional |
| PLA-CF | *NO | *Highly Recommended |
YES | YES | *Required |
| PETG-CF | *NO | *Highly Recommended |
YES | YES | *Required |
| PAHT-CF | *NO | YES | *Highly Recommended |
YES | *Required |
| PET-CF | *NO | YES | *Highly Recommended |
YES | *Required |
[*Note]
- Filaments with carbon fiber, glass fiber, metal, or other inorganic particles are prone to clog a 0.2 mm nozzle.
- For filaments containing carbon fiber or glass fiber, it is highly recommended to use a hardened steel 0.6 mm nozzle to minimize the risk of clogging and abrasion.
- Bambu PLA-CF and Bambu PETG-CF have been extensively tested and proven to have a low risk of clogging when printed with a hardened steel 0.4 mm nozzle, while also achieving higher print quality.