Hoppa í meiginmál
Pantaðu fyrir 12:00 á virkum dögum þá afgreiðum við samdægurs
Afgreiðum samdægurs ef pantað er fyrir 12:00 virka daga

Bambu Lab X1 Hotend Assembly - Hert eða ryðfrítt stál

frá Bambu Lab
Verð 8.490 kr - Verð 8.490 kr
Verð
8.490 kr
8.490 kr - 8.490 kr
Verð nú 8.490 kr
með VSK
Staða:
á lager, tilbúin til afhendingar
Staða:
á lager, tilbúin til afhendingar
Staða:
á lager, tilbúin til afhendingar
Staða:
Uppselt tímabundið
Staða:
Uppselt tímabundið
SKU FAH001
Stærð: X1 - Hert stál 0.4mm

Heilt sett af heitumenda fyrir Bambu Lab X1, veldu um fjórar mismunandi stærðir af stút úr hertu stáli eða ryðfríu stáli

Hert stál: 0.4mm, 0.6mm eða 0.8mm

Ryðfrítt stál: 0.2mm eða 0.4mm

Settið inniheldur viftu, hitara og hitamæli, allt sem þú þarft til að skipta hratt og örugglega um stútinn.

Þetta sett gengur ekki fyrir P1P prentarann, smelltu hér fyrir stúta sem passa á P1P


Highlights of Various Nozzle Diameters

0.2mm Nozzle
Optimal Print Fineness

Extremely small layer gaps
More detailed on the vertical print surface

图片加载失败文案

0.2mm Nozzle
Optimal Print Fineness

Smaller diameter extrudes thin filaments
High resolution on the horizontal print surface

图片加载失败文案

0.6mm and 0.8mm Nozzle
Faster Print Speed

Larger diameter extrudes more filaments per second, resulting in faster print speed




图片加载失败文案

The 0.4mm nozzle is widely recognized as the standard nozzle diameter for modern 3D printers due to its optimal balance between print quality and print speed. This nozzle size is utilized in both the Bambu Lab X1 Series and P1P 3D printers.



Filament Compatibility

Material 0.2 mm Nozzle 0.4 mm Nozzle 0.6 mm Nozzle 0.8 mm Nozzle Hardened Steel Required?
General PLA YES YES YES YES Optional
Wood/Rock/Metal-filled PLA *NO YES YES YES Optional
PETG YES YES YES YES Optional
PVA YES YES YES YES Optional
ABS YES YES YES YES Optional
ASA YES YES YES YES Optional
ASA YES YES YES YES Optional
PC YES YES YES YES Optional
PA *NO YES YES YES Optional
TPU *NO YES YES YES Optional
PLA-CF *NO *Highly
Recommended
YES YES *Required
PETG-CF *NO *Highly
Recommended
YES YES *Required
PAHT-CF *NO YES *Highly
Recommended
YES *Required
PET-CF *NO YES *Highly
Recommended
YES *Required

[*Note]
  1. Filaments with carbon fiber, glass fiber, metal, or other inorganic particles are prone to clog a 0.2 mm nozzle.
  2. For filaments containing carbon fiber or glass fiber, it is highly recommended to use a hardened steel 0.6 mm nozzle to minimize the risk of clogging and abrasion.
  3. Bambu PLA-CF and Bambu PETG-CF have been extensively tested and proven to have a low risk of clogging when printed with a hardened steel 0.4 mm nozzle, while also achieving higher print quality.
Learn more about filament compatibility on Bambu Lab Wiki.